H3c-technologies H3C MSR 930 Bedienungsanleitung

H3C MSR 930 RoutersInstallation Guide Hangzhou H3C Technologies Co., Ltd. http://www.h3c.com Document version: 6W101-20130513

3 Installation tools Accessories provided with the router • Power cord • Console cable • Ring terminal User-supplied tools and equipment • Phillip

4 Item Requirements Yes NoLightning protection • The grounding cable of the chassis is grounded properly. • The grounding terminal of the AC power

5 Installing the router WARNING! To avoid injury, do not touch bare wires, terminals, or parts with high-voltage hazard signs. IMPORTANT: • The

6 Figure 1 Installation flowchart Installing the router When installing the router:

7 Mounting the router on a workbench IMPORTANT: • Reserve a space of 10 cm (3.9 in) around the router for heat dissipation. • Do not place heavy

8 Figure 3 Wall-mounting the router Grounding the router WARNING! Connecting the router grounding cable correctly is crucial for protecting the r

9 4. Cover the joint with the insulation covering, and heat the insulation covering with a blow dryer to completely cover the metal part. Figure 4 A

10 Grounding the router to a buried grounding conductor If the installation site has no grounding strips but offers the option of grounding to earth,

11 Figure 8 Installing the SIM card 5. Position the socket cover and use a screwdriver to fasten the screws on the cover. Figure 9 Installing the

12 Installing a 3G antenna One 3G antenna per 3G module is provided with the router. Purchase one if you need to install two antennas. When you inst

Copyright © 2013, Hangzhou H3C Technologies Co., Ltd. and its licensors All rights reserved No part of this manual may be reproduced or transmitted

13 Installing a 3G antenna extension cable The 3G antenna extension cable is not supplied with the router. Prepare it yourself. To install a 3G anten

14 Figure 15 Connecting the router to a computer Connecting a synchronous/asynchronous serial port cable 1. Verify the port type of the peer devic

15 Figure 17 Connecting the console cable Setting console terminal parameters To set console terminal parameters: 1. Select Start > All Progra

16 Figure 19 Setting the serial port used by the HyperTerminal connection 4. Set Bits per second to 9600, Data bits to 8, Parity to None, Stop bit

17 5. Select File > Properties in the HyperTerminal window. Figure 21 HyperTerminal window 6. On the Settings tab, set the emulation to VT100

18 Connecting the power adapter The router's power adapter converts AC power to DC power, as follows: • AC rated voltage range: 100 VAC to 240

19 • Switch on the power source. • Turn on the power switch on the router. Startup process After power-on, the router initializes its memory, and t

20 Press Enter and the system displays the following prompt: <H3C> This prompt indicates that the router has entered user view and is ready to

21 Troubleshooting IMPORTANT: • The barcode on the router chassis contains product information that must be provided to local sales agent before y

22 No response from the serial port If the serial port does not respond, verify that the serial cable is in good condition and the serial port settin

Preface The H3C MSR 930 Routers Installation Guide includes five chapters, which describe the preparing for installation, installing the router, troub

23 1. On the main BootWare menu, select 8. This setting (Clear Super Password) is valid only for the first reboot of the router. The super password

24 When the router configuration must be saved and you have a console cable, you can log in to the router through the BootWare menu. For more informa

25 Appendix A Chassis views and technical specifications The MSR 930 routers include the following models: MSR 930, MSR 930-GU, MSR 930-GT, MSR 930-D

26 MSR 930-GU Figure 26 MSR 930-GU front view (1) USB port (2) Reset button Figure 27 MSR 930-GU rear view (1) 3G antenna main connector (MAIN) (2

27 Figure 29 MSR 930-GT rear view (1) 3G antenna auxiliary connector (DIV) (2) Power adapter port (3) Console/AUX port (4) Ethernet WAN port (GE0

28 MSR 930-SA Figure 32 MSR 930-SA front view (1) USB port (2) Reset button Figure 33 MSR 930-SA rear view (1) Synchronous/asynchronous serial por

29 Item 930 930-GU 930-GT 930-DG 930-SADimensions (H × W × D) (excluding rubber feet and mounting brackets) 43.6 × 230 × 160 mm (1.72 × 9.06 × 6.30 i

30 Appendix B LEDs LEDs MSR 930 Figure 34 Front panel LEDs (1) System status LED (SYS) (2) Network status LED (INTERNET) (3) VPN status LED (VPN)

31 MSR 930-GU Figure 36 Front panel LEDs (1) System status LED (SYS) (2) Network status LED (INTERNET) (3) VPN status LED (VPN)(4) 3G status LED (

32 Figure 39 Rear panel LEDs (1) GE port status LED (yellow) (2) GE port status LED (green) MSR 930-DG Figure 40 Front panel LEDs (1) System stat

Network topology icons Represents a generic network device, such as a router, switch, or firewall. Represents a routing-capable device, such as a ro

33 MSR 930-SA Figure 42 Front panel LEDs (1) System status LED (SYS) (2) Network status LED (INTERNET) (3) VPN status LED (VPN) Figure 43 Rear pan

34 LED Location Status DescriptionWWAN Front panel Off No link is present or no 3G network is available. Steady green The router has been connected

35 Index A C I L P R S T A Antenna specifications,29 C Chassis views,25 I Installation flowchart,5 Installation prerequisites,5 Installation tools,3

Technical support [email protected] http://www.h3c.com Documentation feedback You can e-mail your comments about product documentation to [email protected].

i Contents Preparing for installation ················································································································

ii MSR 930-DG ········································································································································

1 Preparing for installation Safety recommendations WARNING! Before installation and operation, read all of the safety instructions in Compliance an

2 Gas Max. (mg/m3)NH3 0.05 Cl2 0.01 To prevent overheating: • Provide adequate clearance for air flow, including at least 10 cm (3.94 in) ventilatio