H3c-technologies H3C MSR 50 Bedienungsanleitung PDF herunterladen (Seite 12)

Ste

Command

Remar

13. Specify an IPX RIP update interval.

ipx rip timer update seconds

Optional.

The default is 60 seconds.

14. Configure an aging interval for IPX

RIP routing entries.

ipx rip multiplier multiplier

Optional.

The default is 3 times the update

interval.

15. Enter interface view.

interface interface-type

interface-number

N/A

16. Configure the maximum length of

IPX RIP updates.

ipx rip mtu bytes

Optional.

The default is 432 bytes.

Configuring IPX SAP

With IPX enabled on an interface, the system will automatically use SAP to maintain and advertise

dynamic service information. You can also configure the SAP related parameters or service information

based on actual network requirements.

Configuration prerequisite

Configure basic IPX.

Enabling IPX SAP

Ste

Command

Remar

17. Enter system view.

system-view

N/A

18. Enter interface view.

interface interface-type

interface-number

N/A

19. Enable IPX SAP.

undo ipx sap disable

Optional.

By default, IPX SAP is enabled after IPX is e

nabled on the interface.

Configuring IPX SAP timers

In a large network, IPX SAP broadcasts might occupy much bandwidth. Changing IPX SAP update

interval is an effective way to reduce bandwidth occupation. Configure IPX SAP aging interval as a value

multiple times the update interval.

All servers and routers on the network must have the same SAP update interval. Otherwise, a router might

consider a working server failed.

If the service information is not updated within the aging interval, it is be deleted from the service

information table.

To configure IPX SAP timers:

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 21 22

Kommentare zu diesen Handbüchern

Keine Kommentare

H3c-technologies H3C MSR 50 Bedienungsanleitung Seite 12

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Router H3c-technologies H3C MSR 50