H3c-technologies H3C SecPath F1000-E Bedienungsanleitung Seite 31

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 68
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 30
24
Ste
p
Command
Remarks
1. Enter system view.
system-view N/A
2. Configure an
address pool.
nat address-group group-number
start-address end-address
Not necessary when the router provides only
Easy IP, where an interface's public IP address
is used as the translated IP address.
To configure an address group:
Ste
p
Command
1. Enter system view.
system-view
2. Create an address group and enter its view.
nat address-group group-number
3. Add a member to the address group.
address start-address end-address
NOTE:
Address pools must not overlap.
The IP address pools of address
g
roup members must not overlap with each other or with other address
pools.
Configuring Easy IP
Easy IP allows the firewall to use the IP address of one of its interfaces as the source address of NATed
packets.
To configure Easy IP:
Ste
p
Command
1. Enter system view.
system-view
2. Enter interface view.
interface interface-type interface-number
3. Enable Easy IP by associating an ACL with
the IP address of the interface.
nat outbound [ acl-number ] [ track vrrp virtual-router-id ]
Configuring No-PAT
With a specific ACL associated with an address pool or interface address, No-PAT translates the source
address of a packet permitted by the ACL into an IP address of the address pool or the interface address,
without using the port information.
To configure No-PAT:
Ste
p
Command
1. Enter system view.
system-view
2. Enter interface view.
interface interface-type interface-number
3. Configure No-PAT by associating an ACL with an IP
address pool on the outbound interface for
translating only IP addresses.
nat outbound [ acl-number ] address-group
group-number [ vpn-instance vpn-instance-name ]
no-pat [ track vrrp virtual-router-id ]
Seitenansicht 30
1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 67 68

Kommentare zu diesen Handbüchern

Keine Kommentare