
10
Figure 9 Mount the AP on a wall
(1) Nut (2)
Hex-head bolt
(3)
all-mountin
bracket (4)
Hook
CAUTION:
Check that the AP is secured to the mounting bracket to avoid falloff.
Mounting the AP to a T-rail
NOTE:
• The width of the T-rail must be in the range of 14 mm to 24 mm (0.55 in to 0.94 in).
• This installation method applies only to T-rails.
The two 5 mm (0.20 in) diameter holes on the mounting bracket are needed when you mount the AP to
a T-rail. For the wall-mounting bracket appearance, see Figure 4.
Kommentare zu diesen Handbüchern