H3c-technologies H3C WX5000 Series Access Controllers Bedienungsanleitung PDF herunterladen (Seite 33)

3-13

Connecting Interface Cables

Connecting the Console Cable

1) Select a terminal for configuration.

The terminal can be a character terminal with a standard RS232 serial port or a PC. A PC is used in this

example.

2) Connect the console cable

Power off the access controller, connect the DB-9 female connector of the console cable to the serial

interface of the PC, and connect the RJ-45 connector of the console cable to the console port of the

access controller.

Pay attention to the interface mark and plug the connector to the right interface.

Figure 3-21 Connect the console cable

(1) (2)

(3)

(4)

(5)

(1) RJ-45 connector (2) Console port (3) DB-9 (female) connector

(4) Serial interface of the configuration terminal (5) Console cable

For a powered-on access controller:

z When connecting a PC to the access controller, you are recommended to first connect the DB-9

connector of the console cable to the PC, and then the RJ-45 connector to the console port of the

access controller.

z When disconnecting a PC from the access controller, you are recommended to first disconnect the

RJ-45 connector, and then the DB-9 connector.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 84 85

Keine Kommentare

H3c-technologies H3C WX5000 Series Access Controllers Bedienungsanleitung Seite 33