H3c-technologies H3C WX5500E Series Access Controllers Bedienungsanleitung PDF herunterladen (Seite 221)

211

Setting LLDP parameters for a single port

1. Select Network > LLDP from the navigation tree.

By default, the Port Setup tab is displayed.

2. Click the icon for the port you are configuring.

On the page as shown in Figure 189, the LLDP settings of the port are displayed.

Figure 189 M

odifying LLDP settings on a port

3. Modify the LLDP parameters for the port as described in Table 78.

4. Click Apply.

A progress dialog box appears.

5. Click Close on the progress dialog box when the progress dialog box prompts that the

configuration succeeds.

Table 78 Configuration items

Item Descri

tion

Interface Name Displays the name of the port or ports you are configuring.

DLDP State

Displays the LLDP enabling status on the port you are configuring.

This field is not available when you batch-configure ports.

1 2 ... 216 217 218 219 220 221 222 223 224 225 226 ... 253 254

Keine Kommentare

H3c-technologies H3C WX5500E Series Access Controllers Bedienungsanleitung Seite 221