H3c-technologies H3C WX6000 Series Access Controllers Bedienungsanleitung Seite 16
- Seite / 90
- Inhaltsverzeichnis
- FEHLERBEHEBUNG
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
8
Item Specification
MDI/MDI-X MDI/MDI-X autosensing
Interface speed
10 Mbps, half duplex/full duplex
100 Mbps, half duplex/full duplex
1000 Mbps, full duplex
Medium and maximum transmission distance
Direct-through or crossover Category-5 twisted pair cable,
with a maximum transmission distance of 100 m (328.1 ft)
Function
Host software and Boot ROM upgrade and network
management
Table 7 describes the status LEDs of the Ethernet interface.
Table 7 Description of the management Ethernet interface status LEDs
LEDs Meaning
LINK (green)
• Off—the network cable is not connected.
• Steady on—the network cable is connected.
ACT (orange)
• Off—no data is being transmitted/received.
• Blinking—data is being transmitted/received.
Console port
The WX6103 provides an RS-232 asynchronous serial console port (CON) using an RJ-45 connector. The
console port can be connected to a computer for system debugging, configuration, maintenance,
management, and host software loading.
Table 8 Technical specifications for the console port
Item Specification
Connector type RJ-45
Number of interfaces 1
Interface standard Asynchronous EIA/TIA-232
Baud rate
9600 bps to 115200 bps
9600 bps by default
Transmission distance ≤15 m (49.21 ft)
Functions
• To connect with a character terminal
• To connect with the serial interface of a local PC
running a terminal emulation program for access
controller configuration
• Command line interface
Reset button
The reset button (RESET) is used to restart the current active main control board.
• If the access controller has only one main control board, pressing the reset button reboots the
access controller.
- H3C WX6103 Access Controller 1
- Preface 3
- Obtaining documentation 4
- Technical support 4
- Documentation feedback 5
- Contents 6
- Access controller overview 9
- Dimensions and weight 10
- Power supply 10
- Fan tray 12
- Air filter (optional) 13
- Main control boards 14
- Provided interfaces 15
- Reset button 16
- Switch interface board 18
- 10 GE interface module 20
- Preparing for installation 22
- ESD prevention 23
- Safety with laser 23
- Cleanliness requirements 24
- EMI requirements 24
- Installation planning 25
- Installation flowchart 27
- Connecting the power cables 30
- Connecting interface cables 33
- Connecting optical fibers 35
- Cabling recommendations 37
- Cable binding 37
- (1) (2) (3) (4) 39
- Checking the installation 40
- System commissioning 41
- Boot process 45
- NOTE: 47
- Hardware maintenance 48
- Installing a PSU 49
- Removing a board 50
- Installing a board 50
- Removing the fan tray 51
- Installing the fan tray 51
- Installing the air filter 53
- Removing the air filter 54
- Software maintenance 55
- Configuring software upgrade 57
- Troubleshooting 63
- Troubleshooting the fan tray 64
- Appendix B Guide to purchase 68
- Ordering the optical modules 69
- Ordering the fan tray 70
- Ordering the air filter 70
- BootWare menu 71
- Configuration files 72
- BootWare menus 73
- BootWare submenus 74
- File control submenu 75
- BootWare operation submenu 75
- Upgrading the BootWare 76
- To view all files 86
- To remove a file 87
- Dealing with password loss 88
- Super password loss 89
Verwandte Produkte und Handbücher für Router H3c-technologies H3C WX6000 Series Access Controllers
(179 Seiten)
(13 Seiten)Security Chimneys HE43-2 manuels
Manuels d'utilisation et guides de l'utilisateur pour Foyers Security Chimneys HE43-2.
Nous fournissons des manuels en pdf 1 Security Chimneys HE43-2 à télécharger gratuitement par type de document : Manuel d'instructions
Kommentare zu diesen Handbüchern