H3c-technologies H3C SecPath F100-C-EI Bedienungsanleitung PDF herunterladen (Seite 53)

Installation Manual

H3C SecPath F100-C-EI Firewall

Chapter 5 Maintaining Software

5-3

8: Do not check the version of the software

9: Exit and reboot

Enter your choice(1-9):

Note that:

z To download an application program using XModem, see

section

5.2 “Upgrading Application and Boot ROM

Programs Using XModem” on page

5-4.

z If option 5 is selected, the system starts up with the initial

configurations.

z If option 8 is selected, the system ignores the software

version of the Boot ROM program, its extended segment,

and application program for backward compatibility. If you

fail to upgrade the software because the system decides

that you are using an “invalid version” even when the correct

version is used, you can use option 7 to ignore the version

check during a software upgrading. Note that this option

works only once when you select it. The system resumes

version check after you reboot the firewall.

5.1.2 Boot ROM Operation Menu of the Firewall

As mentioned earlier, you can select 7 in the Boot menu to enter

the Boot ROM operation menu as follows:

Boot ROM Operation Menu:

1: Download Boot ROM with XModem

2: Download Extended Segment of Boot ROM with XModem

3: Restore Extended Segment of Boot ROM from FLASH

4: Backup Extended Segment of Boot ROM to FLASH

5: Exit to Main Menu

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 78 79

Keine Kommentare

H3c-technologies H3C SecPath F100-C-EI Bedienungsanleitung Seite 53