H3c-technologies H3C SecPath F100-C-EI Bedienungsanleitung PDF herunterladen (Seite 55)

Installation Manual

H3C SecPath F100-C-EI Firewall

Chapter 5 Maintaining Software

5-5

Enter your choice(1-6):

2) Select an appropriate download speed. For example, type 5

to select 115200 bps. The firewall will display the following

information:

Download speed is 115200 bps. Change the terminal's speed

to 115200 bps, and select XModem protocol. Press <ENTER>

key when ready.

3) Because the baudrate of the firewall is now 115200 bps,

while that of the console terminal is 9600 bps, the two sides

cannot communicate. Therefore, you need to change the

Bits per second setting to 115200 in HyperTerminal before

pressing Enter.

Step 1: Select Call > Disconnect in the HyperTerminal window.

Figure 5-1 Disconnect the console terminal

Step 2: Select File > Properties, click Configure and change the

baudrate to 115200. Then click OK.

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 78 79

Keine Kommentare

H3c-technologies H3C SecPath F100-C-EI Bedienungsanleitung Seite 55