H3c-technologies H3C SecPath F1000-E Bedienungsanleitung PDF herunterladen (Seite 23)

• The firewall is ready for installation and has been carried to a place near the installation site and

convenient for moving.

Unpacking the firewall

Figure 14 Unpacking the firewall

Mounting the firewall on a workbench

IMPORTANT:

• Ensure good ventilation and 10 cm (3.94 in) of clearance around the chassis for heat dissipation.

• Avoid placing heavy objects on the firewall.

To mount the firewall on a workbench:

1. Verify that the workbench is sturdy and well grounded.

2. Place the firewall with bottom up, and clean the round holes in the chassis bottom with dry cloth.

3. Attach the rubber feet to the four round holes in the chassis bottom.

4. Place the firewall with upside up on the workbench.

Installing the firewall in a 19-inch rack

Installing an F1000-E in the rack

To install the firewall in the rack:

1. As shown in Figure 15, mark the position

s of the cage nuts on the front rack posts by using a front

mounting bracket and on the rear rack posts by using a rear mounting bracket.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 94 95

Keine Kommentare

H3c-technologies H3C SecPath F1000-E Bedienungsanleitung Seite 23