H3c-technologies H3C SecPath F1000-E Bedienungsanleitung PDF herunterladen (Seite 21)

Figure 8 Device list

On the port group configuration page, click Add to enter the page for adding a port group, as shown

Figure 9. Perform the following configurations:

• Type the port group name.

• Select the configured IP address group. Note that the IP address used by the user to access the

network must be within this IP address group.

• Use the default settings for other parameters.

Figure 9 Port group configuration

# Select Service Parameters > Validate System Configuration from the navigation tree to

make the above configurations take effect.

Step2 Configure Device

• Configure a RADIUS scheme

# Create a RADIUS scheme named rs1 and enter its view.

<Device> system-view

[Device] radius scheme rs1

# Set the server type for the RADIUS scheme. When using the CAMS or iMC server, you need to set the

server type to extended.

[Device-radius-rs1] server-type extended

# Specify the primary authentication server and primary accounting server, and configure the keys for

communication with the servers.

[Device-radius-rs1] primary authentication 192.168.0.112

[Device-radius-rs1] primary accounting 192.168.0.112

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 181 182

Keine Kommentare

H3c-technologies H3C SecPath F1000-E Bedienungsanleitung Seite 21