H3c-technologies H3C SecPath F1000-E Bedienungsanleitung PDF herunterladen (Seite 23)

State:ONLINE

SubState:NONE

ACL:NONE

Work-mode:stand-alone

MAC IP Vlan Interface

---------------------------------------------------------------------

0015-e9a6-7cfe 2.2.2.2 0 GigabitEthernet0/2

On interface GigabitEthernet0/2:total 1 user(s) matched, 1 listed.

Configuring Re-DHCP Portal Authentication

Network requirements

As shown in Figure 10:

• The host is directly connected to Device and Device is configured for re-DHCP portal authentication.

The host is assigned with an IP address through the DHCP server. Before passing portal

authentication, the host uses an assigned private IP address. After passing portal authentication, it

can get a public IP address and then the user using the host can access Internet resources.

• A RADIUS server serves as the authentication/accounting server.

Figure 10 Configure re-DHCP portal authentication

192.168.0.111/24

192.168.0.113/24

192.168.0.112/24

Device

Host

Automatically obtains

an IP address

GE0/2

20.20.20.1/24

10.0.0.1/24 sub

GE0/1

192.168.0.100/24

Portal server

RADIUS server

DHCP server

Configuration procedure

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 181 182

Keine Kommentare

H3c-technologies H3C SecPath F1000-E Bedienungsanleitung Seite 23