H3c-technologies H3C SecPath L1000-A Load Balancer Bedienungsanleitung PDF herunterladen (Seite 41)

Figure 31 Modifying interface information

3. Modify the interface as described in Table 7.

4. Click Apply.

Table 7 Configuration items

Item Descri

tion

Interface Name

Set the name for the interface or its subinterface.

• If you select a logical interface type from the list, such as LoopBack,

Vlan-interface, and Virtual-Template, set the interface number in the box

behind to create the logical interface.

• If you select a specific Ethernet interface name from the list, such as

GigabitEthernet 0/1, set the subinterface number in the box behind to

create a subinterface of the Ethernet interface.

Interface Status

Display and set the interface status:

• Connected—Indicates that the current interface is up and connected, click

the Disable button to shut down the interface.

• Not connected—Indicates that the current interface is up, but not

connected, click the Disable button to shut down the interface.

• Administratively Down—Indicates that the current interface is shut down

by a network administrator, click the Enable button to bring up the

interface.

After you click the Enable/Disable button, the page displaying interface

information appears automatically.

• For an interface whose status cannot be changed, the Enable/Disable

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 83 84

Keine Kommentare

H3c-technologies H3C SecPath L1000-A Load Balancer Bedienungsanleitung Seite 41