H3c-technologies H3C WX6000 Series Access Controllers Bedienungsanleitung PDF herunterladen (Seite 150)

11-15

Configuring TCP Tests

TCP tests of an NQA test group are used to test the TCP connection between the NQA client and a port

on the NQA server and the time for setting up a connection. The test result helps you understand the

availability and performance of the services provided by the port on the server.

Configuration prerequisites

TCP tests require cooperation between the NQA server and the NQA client. Before you start TCP tests,

configure a TCP listening service on the NQA server. For more information about the TCP listening

service configuration, see

Configuring the NQA Server.

Configuring TCP tests

Follow these steps to configure TCP tests:

To do… Use the command… Remarks

Enter system view

system-view

—

Enter NQA test group view

nqa

entry

admin-name

operation-tag

—

Configure the test type as TCP and

enter test type view

type

tcp

Required

Configure the destination address

of TCP probe packets

destination ip

ip-address

Required

By default, no destination IP

address is configured.

The destination address must be

the same as the IP address of the

listening service configured on the

NQA server.

Configure the destination port of

TCP probe packets

destination port

port-number

Required

By default, no destination port

number is configured.

The destination port number must

be the same as that of the listening

service on the NQA server.

Configure the source IP address of

TCP probe packets

source ip

ip-address

Optional

By default, no source IP address is

specified.

The source IP address must be the

IP address of a local interface. The

local interface must be up;

otherwise, no probe packets can

be sent out.

Configure optional parameters

See Configuring Optional

Parameters for an NQA Test

Group

Optional

Configuring UDP Echo Tests

UDP echo tests of an NQA test group are used to test the connectivity and round-trip time of a UDP

packet from the client to the specified UDP port on the NQA server.

1 2 ... 145 146 147 148 149 150 151 152 153 154 155 ... 178 179

Kommentare zu diesen Handbüchern

Keine Kommentare

H3c-technologies H3C WX6000 Series Access Controllers Bedienungsanleitung Seite 150

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Router H3c-technologies H3C WX6000 Series Access Controllers