H3c-technologies H3C WX6000 Series Access Controllers Bedienungsanleitung Seite 96

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 179
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 95
7-4
To do… Use the command… Remarks
Add an SNMPv3 user to an SNMP
agent group
snmp-agent usm-user v3
user-name group-name [ [
cipher
]
authentication-mode
{
md5
|
sha
} auth-password
[
privacy-mode
{
3des
|
aes128
|
des56
} priv-password ] ] [
acl
acl-number ]
Required
If the
cipher
keyword is specified,
the arguments auth-password and
priv-password are considered as
cipher text password.
Configure the maximum size of an
SNMP packet that can be received
or sent by an SNMP agent
snmp-agent packet max-size
byte-count
Optional
2000 bytes by default
Set the local access controller as
the SNMP proxy agent for an
SNMP agent
snmp-agent proxy
{
ip
ipv4-address
|
ipv6
ipv6-address
}
Optional
Configuring SNMPv1 and SNMPv2c
Follow these steps to configure SNMPv1 and SNMPv2c:
To do… Use the command… Remarks
Enter system view
system-view
Enable SNMP agent
snmp-agent
Optional
Disabled by default
You can also enable SNMP agent
by using any command that begins
with
snmp-agent
.
Configure SNMP agent system
information
snmp-agent sys-info
{
contact
sys-contact |
location
sys-location
|
version
{ {
v1
|
v2c
|
v3
}*
|
all
} }
Required
The defaults are as follows:
Hangzhou H3C Technologies Co.,
Ltd. for contact,
Hangzhou China for location and
SNMP v3 for the version.
Configure the engine ID for a local
SNMP agent
snmp-agent local-engineid
engineid
Optional
Company ID and device ID by
default
Create or update MIB view content
for an SNMP agent
snmp-agent mib-view
{
excluded
|
included
}
view-name oid-tree [
mask
mask-value ]
Optional
ViewDefault by default
Seitenansicht 95
1 2 ... 91 92 93 94 95 96 97 98 99 100 101 ... 178 179

Kommentare zu diesen Handbüchern

Keine Kommentare